10 EV500 User’s Guide
OSD Options
u Contrast - increases or decreases display image contrast.
u Brightness - increases or decreases display image brightness.
u Horizontal Position - moves display image to the left or right side.
u Horizontal Size - increases or decreases the width of the display
image.
u Vertical Position - moves the display image to the top or bottom of
the screen.
u Vertical Size - increases or decreases the height of the display
image.
u Pincushion - curves the sides of the display image inward or
outward.
u Trapezoid - increases or decreases the trapezoid distortion of the
display image.
u Degauss - removes magnetic discoloration from the display image.
u Reset - returns most options to the original factory default settings
if the monitor is currently using a preset video mode. (See the
“Video modes” section in this guide for information about the
factory preset modes.)
u More - opens the Advanced Option menu. This menu allows you
to adjust the following options:
• Rotation - rotates the entire display image.
• Parallelogram - shift the top and bottom of the display images
horizontally in opposite directions
• Bow - shift the center of the display image horizontally.
• Horizontal Top Corner - squares off the top display corners.
• Horizontal bottom Corner - squares off the bottom display
corners.
• Horizontal Moire - reduces the optical effect of wavy lines or
ripples on the display image in the vertical direction.
• Vertical Moire - reduces the optical effect of wavy lines or
ripples on the display image in the horizontal direction.
u Color Manager - opens the Color Manager menu, which lets
you change the color temperature of the display image.
EV500-u5.p65 1999/9/16, PM 05:4110
To Next Page
Loading...
Need help?
General
