EasyManuals Logo

Gateway EV500 User Manual

Gateway EV500
26 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #8 background imageLoading...
Page #8 background image
8 EV500 User’s Guide
Operation
Starting the monitor
1. Press the power button once. The power LED lights and the
monitor demagnetizes itself for about five seconds.
Caution!
During this time, the monitor generates a strong magnetic field.
This field can erase or seriously affect data stored on magnetic
tapes or diskettes that are stored or placed next to the monitor.
2. Turn on the computer.
3. Once the system is running, the power LED on the monitor
should be green. If not, check the connections and refer to the
“Troubleshooting” section of this guide..
4. Adjust the controls to get the best picture. Experiment with the
display settings to choose the ideal image size and position for
you. Go to the “Adjusting display setting” section in this guide for
information about changing your display.
Note:
If you need to disconnect the power cord from either the wall
socket or monitor, wait 30 seconds after you turn off the
monitor before you unplug it. Wait 30 seconds lets the monitor
discharge any static electricity from the screen surface so you
will not get any static shocks.
EV500-u5.p65 1999/9/16, PM 05:418

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Gateway EV500 and is the answer not in the manual?

Gateway EV500 Specifications

General IconGeneral
BrandGateway
ModelEV500
CategoryMonitor
LanguageEnglish

Related product manuals