7
Removing the base
You can use your monitor without the base to save space or to fit it
into a smaller area in a computer desk. Remove the base as follows:
1. Turn off the monitor and disconnect any cables.
2. Carefully set the monitor on its side with the bottom of the
monitor facing you.
3. Rotate the base so that you can easily get to the retaining latch on
the bottom of the monitor.
4. Press down on the retaining latch. While holding down the latch,
slide the base toward the back of the monitor.
Installation
EV500-u5.p65 1999/9/16, PM 05:417
To Next Page
Loading...
