10
232001240G(08)
vacuum cutting box, and honeycomb table are recommended. Please contact GCC or
your local GCC distributor for more information.
• Do not laser heat-sensitive surfaces or materials that may generate toxic fumes, such as
PVC and Teflon.
• Regularly clean and maintain your machine according to our cleaning and maintenance
instructions. Doing so will ensure a machine that will operate effectively and safely over a
long period of time.
1.6 Operating Environment
Please follow the guidelines when considering a suitable location to set the LaserPro X252RX
& X380RX. Improper work environments may lead to operational malfunction and/or unsafe
working conditions. The LaserPro X252RX & X380RX should be placed and operated in a
standard office-type environment.
• Avoid environments where the machine is exposed to high levels of dust,
temperature (temperatures exceeding 30°C or 85°F) o r humidity (humidity
exceeding 70% or where the ambient temperature is near the dew point).
• Avoid small, enclosed areas with poor ventilation.
• Avoid areas with high levels of noise and electrical noise.
• Select a location that is large enough to accommodate the laser machine, an
exhaust system, a computer and a work or storage table.
• Select a location in which the ambient temperature remains between 15°C and
30°C (60°F to 85°F).
• Select a location in which there is a short, direct path to the fume exhaust system.
• Set the laser machine on a floor surface that is completely even.
• Make sure your smoke or fire detection system in the immediate area is
functioning.
NOTE
SmartGUARD™ is an optional fire detection alarm system developed by GCC. Contact
your local GCC authorized distributor for more details for having this safety option
installed onto your system.
To Next Page
Loading...
