53
232001240G(08)
Note
For this screenshot example, CorelDraw was used as the software application.
The LaserPro X252RX & X380RX Print Driver consists of seven primary sections (pages) in which you will be
able to choose various cutting options and settings:
Option Page
Pen Page
Advance Page
Paper Page
Language Page
TIP
The following sections describe the specific functions for each of the settings found in
the LaserPro X252RX & X380RX Print Driver. If you are new to laser cutting, it is
recommended that you first familiarize yourself with the general principals of the laser
process in Section 6, especially the Vector Cutting concepts. This will make it easier to
understand the various descriptions and terminology used in this section.
5.2.3.1 LaserPro X252RX & X380RX Print Driver >> Option Page
Mode Setting (OPTIONS PAGE) [DEFAULT SETTING: Black & White]
You can select from four primary mode settings, depending on your application or results you
would like to achieve.
To Next Page
Loading...
