EasyManua.ls Logo

GE Appliances PGB900 - Stainless Steel Surfaces; Model

GE Appliances PGB900
128 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Care and cleaning of the range.
]
The gasket is designed with a gap
at the bottom to allow for proper
air circulation.
Do not rub or clean the door
gasket-it has an extremely low
resistance to abrasion.
If you notice the gasket becoming
worn, frayed or damaged in any
way or if it has become displaced
on the door, you should have it
replaced.
Cleaning the Door
Toclean the inside of the door:
Do not allow excesswater to run into any
holesor slotsin the door.
Wipe dishwashing detergent over any
baked-on spatters on the glass.Usea single
sidedsafety razor blade to clean it off.Then
wipe over the glass with a soapy cloth to
remove any residueand dry off.
Thearea outside the gasket can be cleaned
with a soup-filled plastic scouring pad.
Toclean the outside of the door'.
Usesoup and water to thoroughly cleanthe
top, sidesand front of the oven door. Rinse
well. You may also use a glass cleaner to
cleanthe glass on the outside
ofthe door.
Spillageof marinades, fruit juices,tomato
saucesand basting materials containing
acids may cause discoloration and should be
wiped up immediately. When the surface is
cool,clean and rinse.
Do not useoven cleaners,cleansing powders
or harsh abrasives on the
outside of the door.
Stainless Steel Surfaces (onsome models)
Do not use a steel wool pad; it will scratch the
surface.
IMPORTANT: APPLY A PROTECTIVE COAT
OF CERAMA BRYTE®PART # WBO2T10111
STAINLESS STEEL BRIGHTENER BEFORE
USING.
Thiswill helpyou to maintain the brightness
and appearance of your stainlesssteel range.
Inorder to avoid any discolorations and/or
grease stains,we recommend cleaning and
removing any spills,spots and grease from
the range after use.
It isimportant to use a soft cloth or paper
towel every time the range is cleaned to
avoid any scratches.
Readcarefully the instructions on the back of
the Brightener for better results.
Cleaning Instructions:
1. Removegrates.
2. Wash using warm, soapy water:
Wet soft cloth or paper towel (avoid using
excessivewater).
Wipe the surface in the direction of the grain
(following the steel lines).
Rinseand wring out a soft cloth or paper
towel and dry the range.
3. Apply a degreaser that does not contain
sodium hydroxide or stainless steel cleaner
(follow instructions).
4. Apply Cerama Bryte®StainlessSteel
Brightener(follow instructions).
5. Repeatsteps 2-/4 as many times as needed.
6. Put grates back in place.
Followthese instructions for any stainless steel
surface on your range.
DONOT USE for cooktop or stainless steel
parts cleaning:
, Caustic lye (sodium hydroxide) or cleaners
containing this chemical
. Hard or steelwool pads
Abrasive materials or chemicals
Toinquire about purchasing stainlesssteel
appliance cleaneror polish,or to find the
location of a dealer nearest you, please call our
toll-free number:
National Parts Center 800.626.2002(U.S.)
800.661.1616(Canada)
GEAppliances.com(U.SJ
www.GEAppliances.ca (Canada)
40

Related product manuals