GE AV-300I - Page 105

AV-300i Version 2 User’s Guide
—————— Function Description ——————
Ch.1
105
The Gain Adaptive Block is shown in the figure below.
. . . .
Ref
Ref
SGP ref src
Int SGP ref
Int SGP ref
0 cnt
SpdI2 gain %
10 %
SpdP2 gain %
10 %
SGP tran32 l thr
0%
SGP tran21 h thr
0%
SGP tran32 band
0%
SGP tran21 band
0%
InUse SpdP gain%
InUse SpdI gain%
SGP base value
16384 cnt
SGP ref mon
SpdP3 gain %
10 %
SpdP1 gain %
10 %
SpdI1 gain %
10 %
SpdI3 gain %
10 %
Spd gain profile src
SGP ref src Source selection of the adaptive x axis
Spd gain profile cfg
SpdP1 gain % Proportional Gain 1° segment
SpdI1 gain % Integral Gain 1° segment
SpdP2 gain % Proportional Gain 2° segment
SpdI2 gain % Integral Gain 2°segment
SpdP3 gain % Proportional Gain 3° segment
SpdI3 gain % Integral Gain 3° segment
SGP tran21 h thr Segment transition point from 1 to 2
SGP tran32 l thr Segment transition point from 2 to 3
SGP tran21 band Width of the transition band from 1 to 2
SGP tran32 band Width of the transition band from 2 to 3
Int SGP ref SGP internal reference
SGP base value Basic value corresponding to 100% of the SGP Reference
Spd gain profile mon
SGP ref mon SGP Reference Monitor
InUse SpdP gain% Value of the proportional gain in use
InUse SpdI gain% Value of the integral gain in use