GE AV-300I - Page 133

AV-300i Version 2 User’s Guide
—————— Function Description ——————
Ch.1
133
Description:
COMMUNICATION SBI
SBI config
SBI enable
SBI monitor
Last SBI error
Drv->SBI word
Drv->SBI W src
Drv SBI W0 src
Drv SBI W1 src
Drv SBI W2 src
Drv SBI W3 src
Drv SBI W4 src
Drv SBI W5 src
Drv->SBI W cfg
Int Drv SBI W0
Int Drv SBI W1
Int Drv SBI W2
Int Drv SBI W3
Int Drv SBI W4
Int Drv SBI W5
Drv->SBI W mon
Drv SBI W0 mon
Drv SBI W1 mon
Drv SBI W2 mon
Drv SBI W3 mon
Drv SBI W4 mon
Drv SBI W5 mon
SBI->Drv word
SBI->Drv W mon
SBI Drv W0 mon
SBI Drv W1 mon
SBI Drv W2 mon
SBI Drv W3 mon
SBI Drv W4 mon
SBI Drv W5 mon
COMMUNICATION SAVE PARAMETER
COMMUNICATION SBI
SBI Config
SBI enable It enables the communication initialization with the SBI when the
Drive is started. If the SBI card is not found, the communication is
disabled and the Comm card fault alarm gets active.
SBI Monitor
Last SBI error It defines the last found error: 0 = OK, 1 = Hw fault, 2 = Bus Loss