Need help?Do you have a question about the GE Bently Nevada 3300/16 and is the answer not in the manual?
General| Type | Vibration Monitor |
|---|---|
| Model | 3300/16 |
| Manufacturer | GE Bently Nevada |
| Category | Measuring Instruments |
| Output | 4-20 mA |
| Power Supply | 24 VDC |
| Channels | 16 |
| OK LED | Yes |
| Application | Condition Monitoring |
| Housing Material | Aluminum |
| Input | Proximitor |
Describes the state and functionality of the OK LEDs.
Explains the conditions and states indicated by the Bypass LEDs.
Details the conditions and states of the Alert LEDs.
Outlines the conditions and states of the Danger LEDs.
Instructions for displaying alert setpoint values on the meter.
Instructions for displaying danger setpoint values on the meter.
Guide to adjusting alert and danger setpoints for machine trip levels.
Procedure for adjusting the gap alert setpoints for under and over conditions.
Details the required equipment and setup for testing alarms.
Procedure for testing vibration alarms on Channel A.
Steps to test the gap alarm functionality for Channel A.
Outlines the equipment and setup for testing OK limits.
Procedure to test the upper OK limit for channel A.
Procedure to test the lower OK limit for channel A.
Details the equipment and setup required for channel calibration.
Step-by-step guide for calibrating the monitor channels.
Illustrates jumper positions for PWA 140720-01.
Lists option settings and jumper positions for the main board.
Details jumper settings for various vibration full-scale ranges.
Shows jumper configuration for PWA 135305-01.
Lists option settings and jumper positions for the main board.
Details jumper settings for various vibration full-scale ranges.
Illustrates jumper locations for PWA 86739-01.
Lists option settings and jumper positions for the main board.
Details jumper settings for various vibration full-scale ranges.
To Next Page