GE D30 User Manual

CHAPTER 6: ACTUAL VALUES PRODUCT INFORMATION
D30 LINE DISTANCE PROTECTION SYSTEM – INSTRUCTION MANUAL 6-29
6
6.6.2.2 Graphical front panel
ACTUAL VALUES  PRODUCT INFO  FIRMWARE REVISIONS
The shown data is illustrative only. A modification file number of 0 indicates that, currently, no modifications have been
installed. The date format reflects the format specified for the clock and can vary from that shown here.
 FIRMWARE REVISIONS


D30 Relay
REVISION: 7.6x
Range: 0.00 to 655.35
Revision number of the application firmware.

MODIFICATION FILE
NUMBER: 0
Range: 0 to 65535 (ID of the MOD FILE)
Value is 0 for each standard firmware release.

BOOT PROGRAM
REVISION: 7.01
Range: 0.00 to 655.35
Revision number of the boot program firmware.

COMPILE DATE:
2017/06/15 04:55:16
Range: YYYY/MM/DD HH:MM:SS
Date and time when product firmware was built.

BOOT DATE:
2016/09/15 16:41:32
Range: YYYY/MM/DD HH:MM:SS
Date and time when the boot program was built.

GFP PROGRAM
REVISION: 7.60
Range: 0.00 to 655.35
Revision number of front panel program firmware.

GFP COMPILE DATE:
2017/03/03 12:58:00
Range: YYYY/MM/DD HH:MM:SS
Date/time when graphical front panel firmware built.

GFP BOOT PROGRAM
REVISION: 1.00
Range: 0.00 to 655.35
Revision number of panel boot program firmware.

GFP BOOT COMP. DATE:
2017/03/03 12:58:00
Range: YYYY/MM/DD HH:MM:SS
Date/time when panel boot program was built.

FPGA PROGRAM
REVISION: 02.02
Range: 0.00 to 655.35
Revision number for FPGA.

FPGA DATE:
2016/09/15 16:41:32
Range: YYYY/MM/DD HH:MM:SS
Date and time when the FPGA was built.

GE D30 Specifications

General

Brand	GE
Model	D30
Category	Relays
Language	English