1-8 DINAMAP
®
ProCare Monitor Service Manual Revision C
2009381-001
Introduction: Service Requirements
Service Requirements
Follow the service requirements listed below.
Refer equipment servicing to GE Medical Systems Information Technologies
authorized service personnel only.
Any unauthorized attempt to repair equipment under warranty voids that
warranty.
It is the user’s responsibility to report the need for service to GE Medical
Systems Information Technologies or to one of GE’s authorized agents.
Failure on the part of the responsible individual, hospital or institution using
this equipment to implement a satisfactory maintenance schedule may
cause undue equipment failure and possible health hazards.
Regular maintenance, irrespective of usage, is essential to ensure that the
equipment will always be functional when required.
Equipment ID
The following graphic illustrates the components of the monitor’s serial number.
Intended Audience
This manual is intended for service representatives and technical personnel who
maintain, troubleshoot, or repair this equipment.
GEMS IT Global Serial Number Format
13- Digit
# # # # # # # # # # # # #
3-character product code
Year
Fiscal week
Sequential serial number (up to 9999)
Manufacturing site
Misc. : Prototype, refurbish, etc.
To Next Page
Loading...
