GE DINAMAP ProCare 100 - Page 48

3-10 DINAMAP
®
ProCare Monitor Service Manual Revision C
2009381-001
Installation: Configuring Your ProCare Monitor
The advanced configuration mode option pages are as follows:
Displayed on Monitor Function
ACF Advanced Configuration Mode announcement
(No settings are entered on this page.)
rEM Remote mode
0 : Remote mode is disabled
1 : Remote mode is enabled
Adr Host Comm unit address
32 : This is the default value.
br Host Comm bit rate (bits per sec)
0 : 300 bps
1 : 600 bps
2 : 1200 bps
3 : 2400 bps
4 : 4800 bps
5 : 9600 bps (default)
6 : 19200 bps
Mod Host Comm mode
0 : Host Comm Command mode (default)
1 : 1846 Compatibility mode
(1846 mode requires user to also select 600
bps.)