About DVMR menu: This menu provides information
such as:
• Model Designation
• Serial Number
• Hostname
• Software Version
• Software Date
• Boot Code Version
• Hard Disk Size
• IP Address
• Hardware Address (MAC)
• DHCP Lease Expiration Date
• Last DDNS Update Status
• Last DDNS Update Success
View Screens 1 through 10: These menus provide an overview of the units current operating
parameters and the menu settings selected by the user or installer. Each View Screen is described in
the following tables. The default values are bolded and italicized.
The View Screens
View Screen 1
Alarm Input
• Enable/Disable: 1 = Enabled, 0 = Disabled
• Normally Open or Normally Closed: 0 = Open, C = Closed
• Macro: Macro number if activated.
Alarm Action
• Freeze: 1 = Freeze, 0 = No Freeze
• Cameras: Primary camera in alarm and three associated cameras.
• Relay: 1, 2, 1+2, or None.
• Intrusion AND/OR: AND, OR
View Screen 2
Camera
• Enable/Disable: 1 = Enabled, 0 = Disabled
• Signal Gain: AGC setting from 50 through 100. 50
• Covert Camera: Yes or No
• Camera Title: Camera x, x=number
Videoloss Action
• Relay 1: 1 = Enabled, 0 = Disabled
• Relay 2: 1 = Enabled, 0 = Disabled
• Buzzer: 1 = Enabled, 0 = Disabled
0150-0313B 65 DVMRe CT II
To Next Page
Loading...
