EasyManua.ls Logo

GE DVMRe CT II - Record Timer

GE DVMRe CT II
96 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
View Screen 3
Motion Detection
• Enable/Disable: 1 = Enabled, 0 = Disabled
• Activity or Intrusion Detection: I = Intrusion, A = Activity
• Sensitivity: 1 through 10, 5
• Relay Output: None, 1, 2, 1+2
• Link to Event: Yes or No
• Rejection Ratio: High, Medium, or Low
• Target Size: 1 through 255
• Alarm Camera: 1 through 4, 10 or 16
View Screen 4
Record Rate
• Event Camera Settings: T = Timelapse, E = Event, ET = Event and Timelapse
• Timelapse Record Rate: In pictures per second (pps). 30 spp
• Event Record Rate: In pictures per second (pps). 1 pps
• Pre Event Duration: 0 to 5 seconds. 2
• Post Event Duration: 0 to 200 seconds. 0
• Acitvity Record Rate: In pictures per second (pps). 2 spp
• Record Quality: High 8 (7,8,9), Medium (4,5,6), or Standard (1,2,3).
• Event Associated Cameras: Up to 3.
View Screen 5
Record Timer
• DAY: 1-31, Mon, Tue, Wed, Thu, Fri, Sat, Sun, Mon-Fri, Sat-Sun, Mon-Sun
• Start: Time (HH:MM)
• Stop: Time (HH:MM)
• Macro: Macro Number
• On/Off: On or Off
View Screen 6
• Time and Date Display A: On or Off.
• Time and Date Display B: On or Off.
• Time Format: 12 or 24 hour
• Date Format: MM/DD/YY, DD/MM/YY, or YY/MM/DD
• Master Clock: Yes or No.
• Multiscreen Dwell: In seconds. 003
• Full Screen Dwell: In seconds. 003
• Titles Display A: On or Off.
• Titles Display B: On or Off.
0150-0313B 66 DVMRe CT II

Table of Contents