rev.1.1 Page 2-3
2. PERSONNEL SAFETY PRECAUTIONS
The following Pictograms can be found on the E-Cell Stack™ and contained in this Manual:
Pictogram Function Description
WARNING! The E-Cell Stack™ should not be used at any time by untrained
personnel. Do not attempt to operate the E-Cell Stack™ unless
you understand the contents of this manual and have received
training . Serious injury may occur if the procedures in this
manual are not followed.
The E-Cell Stack™ operates under pressure above atmospheric
and/or vacuum below atmospheric. Review the safety
procedures of this manual.
Air scouring is not applicable to E-Cell Stacks™. Air scouring will
not aid in cleaning or removing blockage of E-Cell Stacks™
Any disassembly of this E-Cell Stack™, loosening, or removal of
retaining bolts or other improper handling or use of this E-Cell
Stack™ may cause severe personal injury.
All personnel must be trained on the hazards of working with
chemical cleaning solutions. Rubber gloves, full rubber suits, full-
face shields and goggles must be used when exposure to acid,
caustic, oxidizers or any other chemicals is a possibility.
Install flange guards on all chemical lines.
Electrical
Shock Hazard
The E-Cell Stack™ contains dangerous high voltage when it is
energized. Lockout the dc power supply before working around
the E-Cell Stacks™
Direct
Current (DC)
Used with V or A to indicate DC voltage or current or with On or
Off symbols.
To Next Page
Loading...
