18 1918 19
There are two built-in zoom functions: optical zoom and digital
zoom. When taking photos, you can zoom in or out on an
object using the zoom wheel.
Zoom indicator (See
“Digital Zoom“ on
page 46)
When the optical zoom reaches its maximum value, it stops
momentarily. Release and push the zoom wheel again, and the
optical zoom will switch over to digital zoom automatically.
After the adjustment, the zoom indication scale hides
immediately, and the current zoom status is indicated by the
following symbol
.
Shooting in Auto Mode
Auto mode is the easiest mode to take photos. While
operating in this mode, the camera automatically optimizes
your photos for best results.
To start shooting, do the following:
1. Press the Power button to turn the camera on.
2. In the Mode menu, select the Auto mode (
).
3. Compose your picture in the L
CD screen and press the
Shutter button halfway to focus on the subject.
4. The focus frame in the middle of the LCD will turn t
o green
when the subject is properly in focus.
5. Press the Shutter button fully to capture the image.
Using the Zoom Function
BASIC OPERATION
To Next Page
Loading...
