6868 69
Windows operating system (Windows 2000, Windows XP,
Windows Vista, Windows 7.)
Click the [Safely remove the hardware] icon and remove
the USB connector according to the displayed menu.
Macintosh
Drag the untitled icon to the Trash. ("Untitled")
4. Disconnect the camera once the transfer is completed.
If the USB option is set to [PC] :
Turn the camera o and disconnect the USB cable.
If the USB option is set to [PC (PTP) ] :
Remove the camera from the system as described below
before turning the camera o and disconnecting the USB
cable.
To Next Page
Loading...
