- 58 - eBike, eBike L, eBike EL 2018112-003 Rev J
D: Service Menu
PC: Select the serial COM port and confirm with "OK“.
Then activate the update with "Go".
When the communication link has been established, a blue
progress indicator indicates the file transfer. The modules IFP,
AZP, MRD, NIB, MED will be transferred sequentially. Depending
on the PC performance, the transfer may take a few seconds
up to approx. 1 minute.
eBike: Note: When the AZP download starts, the
beeper may sound for some time.
eBike: Note: During the AZP download, the message
“AZP BOOTL. V2.1” is displayed.
After completion of the AZP download, the
message “AZP READY !” is displayed during
the remaining update process.
eBike: Note: After completion of all modules IFP, AZP,
MRD, NIBP the message "Software Update
is running - wait approx. 15 sec" is
displayed.
Don't switch off the ergometer.
PC: Once the update has been completed, the message
“Download success !!! Close Application !” will appear.
Confirm the message with “Yes”.
To Next Page
Loading...
