HygroPro User’s Manual Page 11
Chapter 1: Installation
1.4.2 Hazardous Area Wiring Connections
Before installing and using the HygroPro in a hazardous (classified)
area, be sure to read and understand all applicable reference materials.
This includes:
• all EU or North American Standards and Directives (see Table 3
and Table 4 on page 17)
• all local safety procedures and practices
• the FM Schematic drawing (see Figure 5 on the next page)
• this user’s manual
Note: It is the installer’s responsibility to follow all applicable
standards and procedures.
!WARNING!
The procedures in this section must be performed only
by trained technicians who have the necessary skills
and qualifications.
To Next Page
Loading...
