HygroPro User’s Manual Page 47
Chapter 4: Specifications
4.6 Built-In Pressure Sensor
Type
• Solid state/piezoresistive
Available Ranges
• 30 to 300 psig (3 to 21 bar)
• 50 to 500 psig (4 to 35 bar)
• 100 to 1000 psig (7 to 69 bar)
• 300 to 3000 psig (21 to 207 bar)
• 500 to 5000 psig (35 to 345 bar)
Note: Psig ranges are based on a constant pressure, with the value
provided at the time of order placement.
Accuracy
• ±1% of full scale (FS)
Warm-up Time
• Meets specified accuracy within 3 minutes
Pressure Rating
• Three times the span of the available range,
to a maximum of 7500 psig (518 bar)
To Next Page
