GE iBox - Page 93

GE Grid Solutions
iBox/iBox Kit
Installation and Maintenance Guide
GE Information
994-0047-5.10-4
93
Configuring Project Properties - Serial, continued
Procedure:
Configuring
Project
Properties -
Serial
[continued]
Step Action
3 Select the D2x tab > General tab. Verify that LAN Based Project is not
checked and click OK.
4 Click GE > Copy Project.
Result: The Copy Project window appears:
5 Type in a New Project Name for your project.
6 Click OK to save.
Next Step
The next step is:
• Configuring iBox Device Properties - Serial on page 94