GE iBox - Configuring and Testing Your Ibox Kit Components

GE Grid Solutions
iBox/iBox Kit
Installation and Maintenance Guide
GE Information
994-0047-5.10-4
89
Configuring and Testing your iBox Kit Components, continued
Configuration
Procedures –
Serial
Connection
The procedures for configuring an iBox Kit with a serial connection are as follows:
• Restoring your SGConfig Project on page 91
• Configuring Project Properties - Serial on page 92
• Configuring iBox Device Properties - Serial on page 94
• Configuring iBox Communications Options - Serial on page 95
• Configuring the Application Firmware on page 96
• Downloading your iBox Configuration - Serial on page 97
• Configuring the DC Analog Module on page 123 (if equipped)
• Configuring the AC Analog Module on page 130 (if equipped)
• Testing the iBox Kit on page 131