GE JBP2 User Manual

ge.com
Oventemperaturetoo
hot ortoocold
Possible Causes
Oven thermostat
needs adjustment.
What ToDo
• Seethe Adjust the oven thermostat-Easy to do
yourself! section.
Clock and timer do Plug on range is not completely • Make sure electrical plug ix l)lugged iuto a live, properly
not work inserted in the electrical outlet, grouuded outlet.
A fuse in your home may be • Replace fl/se or reset drcuit breaker:
blm_l or the circuit breaker
tripped.
Oven controls improperly set. • See tile Using the clock and timer sectiou.
Display goes blank A fuse in your home may be • I_eplace the fl/se or reset the circtfit breaker.
blm_l or the circuit breaker
tripped.
The dock is turned off from • See the Using the clock and timersectiou.
showhlg hi the displa)_
Oven dooris crooked The door is out of position. • Because the oven door ix removable, it sometimes gets
out of positiou dtu'iug iustallatiou. To straighteu the
door, push dowu ou the high coruer.
Oven makes This is the sound of the • This ix uormal.
clicking noise heating element turnhlg
off and on during
cooking functions.
"F--and a number You have a function error code. • Press the CLEAR/OFFp:_d.Put the oveu back
or letter" flash in iuto ol)eratiou.
the display If the function code repeats: • Dis(oune(t all power to the rauge tor at least 30
secouds aud theu recom_ect power./f the functiou
error code rel)eats, call for service.
• Ou sell:cleauing models, if a flmctiou error code
apliea_s din'lug the sell=cleauing cycle, check the oveu
door latch. The latch may have been moved, if ouly
slightly, fl'om the locked positiou. Make sure the latch
ix moved to the right as thr as it will go. Press the
CLEAR/OFFpad. Alh)w the oveu to cool for oue hotu'.
Put the oveu back iuto operatiou.
Power outage Power outage or surge. • Some models will automatically resume their setting once
the power is restored. On models with a clock, you must
reset the clock. If the oven was in use, you must reset it by
I)ressin°"_ the CLEAR/OFFpad, setting, the clock and
resetting any cooking traction.
Display flashes Power faBure.
Unable to get the display Oven control pads were not
to show "SF" pressed properly.
• Reset the clock.
• The BAKEandBROILHI/LOpads m ust be pressed at the
same time and held for 3 seconds.
45
f
! f
n
w
1
w
! =
m •
w M
m
i m
= .
!iiiiiiiiiiii_i_iii_i
m

GE JBP2 Specifications

General

Brand	GE
Model	JBP2
Category	Ranges
Language	English