ge.com
Wire cover holder.
Oven Light Replacement
CAUTION:Before replacing your
oven light bulb, disconnect the electrical
power to the range at the main fuse
or circuit breaker panel.
Be sure to let the light cover and bulb
cool completely.
Toremovethecover:
%
Hold a hand under the cover so it
doesn't fall when released. X&rifll
fingers of the sane hand, firmly
push back the whe cover holdeL
I,ift off the coveL
Do not removeany screws toremove
the cover.
[_ Replace bulb with a 40-watt
appliance bulb.
Toreplacethe cover:
%
Place it into g_oove of die light
receptacle. Pull wire forward m
the cenmr of the cover until it
snaps into place.
[] Connect electrical power to
the _mlge.
il Stopguide
Storage Drawer Removal
Toremovethedrawer:
Pull the drmver out until it stops.
[_ I,ift the flont of the (braver until the
stops clear the guides.
[_ Remove the draweL
Toreplace the drawer:
[_ Place the drawer rails on the guides.
[_ Push the drawer back until it stops.
[_ I,ift the flont of the drawer and
push back until the stops clear the
guides.
[_ I,ower the flont of the drawer and
push back until it closes.
21
To Next Page
Loading...
Need help?
General
