Careand cleaning ofthe range.
Be sure all controls are off and all surfaces are cool before cleaning any part of the range.
If your range is removed for cleaning, servicing or any reason, be sure the anti-tip
device is re-engaged properly when the range is replaced. Failure to take this
precaution could result in tipping of the range and cause injury.
How to Remove Protective Shipping Film and Packaging Tape
Careflllly grasp a corner of file protective
shipping fihn wifll your fingels and slowly
peel it from the appliance suxface. Do not
use ally sharp items to remove file film.
Remove all of the film before using file
appliance for file first time.
To assure no damage is done m file
finish of the product, file safest way to
remove the adhesNe flom packaging tape
on new appliances is an application of a
household liquid dishx,wMfing demrgent.
Apply with a soft cloth and allow m soak.
NOTE:Theadhesivemustberemovedfromaft
parts.It cannotberemovedif it is bakedon.
ControlKnobs
Thecontrolknobsmayberemovedforeasier
cleaning.
Make sure file knobs are in file OFF
positions and pull them straight off file
smms for cleaning.
The knobs can be cleaned in a
dishwasher or flley may also be washed
Mill soap and wateL Make sure die inside
of the knobs are dry before replacing.
Replace the knobs in die OFFposifion m
ensure proper placement.
Control Panel
It's a good idea m wipe die conuol panel
after each use of die oven. Use a damp
clod1 to clean or rinse. Fox cleaning, use
mild soap and water or a 50/50 solution
of vinegax and wateL Fox xinsing, use
clean WamL Polish dxT with a soft cloth.
Do not use abxasive cleansers, strong
liquid cleanexs, plastic scouring pads or
oven cleanexs on the conuol panel--
they will damage the finish.
Oven Heating Elements
Do not clean the bakeelement or the broil
element.Anysoil will bum off when the
elements are heated.
To clean file oven floox; gendy lift
the bake element. (]lean wifll warn1
soapy wateL
18