Chapter 4
Operation
39
store With number keys, sets presets and autopan limits for selected camera; accesses sequence programming for
Calibur multiplexers.
Group. Activates group switching and group sequence initiation.
find With number keys, selects PTZ position saved by the previous store command for selected camera site.
Step
+zoom - Controls the zoom function on selected receiver site’s motorized zoom lens.
PTZ lockout on/off. Asserts or releases PTZ lockout priority. Lower priority keypads will lose PTZ control.
+focus - Controls the focus function on selected receiver site’s motorized zoom lens; disables the autofocus feature on
CyberDome.
Focus + = GRAB VID, Focus - = GRAB END
+iris - Controls the iris function on selected receiver site’s motorized zoom lens.
Backlight bright/dim
esc With number keys, clears alarms and clears number entry.
No shifted function.
1st Selects earliest of pending annunciations.
Macro
autofocus Places selected CyberDome camera in autofocus mode.
Autopan
0 – 9 Selects camera (selects any numeric entry following other keys).
No shifted function.
Places selected DSR, DVMRe, or VCR in fast forward mode.
Site up. Selects the camera number one more than the current one.
Places selected monitor’s DSR, VCR, or DVMRe in fast reverse mode.
Site down. Selects the camera number one less than the current one.
Advances selected DSR or DVMRe one frame forward in pause mode.
Joystick right
Steps selected DVMRe one frame backward in pause mode; selects reverse play in play mode.
Joystick left
Places selected DSR, VCR, or DVMRe in play mode.
Joystick down
Places selected DSR, VCR, or DVMRe in pause mode.
Joystick up
Table 3. Normal and shifted key functions (continued)
Key Function
To Next Page
Loading...
