Peripherals Installation
LOGIQ V2/LOGIQ V1 – Basic Service Manual 3-19
5610739-100 English Rev.10
Peripherals Installation
Overview
This section describes how to install and configure the
peripherals validated for the LOGIQ V2/LOGIQ V1.
About the operation check-out of peripherals, See ‘Peripheral
checks’ on page 4-39 for more information.
Table 3-4: LOGIQ V2/LOGIQ V1 Peripherals
Description Control Model
B/W USB Printer USB port Sony UP-D897 Printer
B/W USB Printer USB port Sony UP-D898MD Printer
Color USB Printer USB port Sony UP-D25MD Printer
Officejet 100 Printer USB port HP Officejet 100 Printer
Officejet Pro 8100 Printer USB port HP Officejet Pro 8100 Printer
1-Pedal Footswitch USB port Footswitch FSU-1000
3-Pedal Footswitch USB port MKF 2-MED GP26
USB Stick USB port Keeber USB Flash Drive 8G
USB3.0 HDD USB port WD Elements 2.5 in USB3.0 HDD 1TB
USB3.0 HDD USB port Seagate Backup Plus 2.5 in USB3.0 HDD 1TB
USB3.0 HDD USB port Seagate Expansion 2.5 in USB3.0 HDD 1TB
Wireless Adapter USB port Netgear A6210 USB Adapter
Probe Adapter Probe port 2 Probe Port Extension Adapter
To Next Page
Loading...
Need help?
General
