Care and Maintenance
10-16 LOGIQ V3/V5/V5 Expert – Basic Service Manual
5726264-100 English Rev.8
10-6-4 Optional Diagnostic Checks
Optionally you can access the diagnostic software as described
in Chapter 5 or 7. View the error logs and run desired
diagnostics.
10-6-4-1 View the Log
1. Review the system error log for any problems.
2. Check the temperature log to see if there are any trends that
could cause problems in the future.
3. Check the Configuration Log; update if needed.
10. Power and
System Status
Indicators
Check for proper operation of all Power and System Status Indicators.
11. Battery Where applicable, check that the battery is not damaged, does not leak,
does not emit an odor, and is not deformed or discolored. Observe all
warnings and cautions for battery handling, recharging, storing, and/or
disposal,
Table 10-10: Physical checks (Continued)
Step Item Description
To Next Page
Loading...
