System Configuration
LOGIQ V3/V5/V5 Expert – Basic Service Manual 3-21
5726264-100 English Rev.8
3-6 System Configuration
3-6-1 Purpose of this section
This section describes how to configure the LOGIQ V3/V5/V5
Expert.
3-6-2 LOGIQ V3/V5/V5 Expert configuration
For complete instructions, refer to the latest revision of the
LOGIQ V3/V5/V5 Expert Basic User Manual, Chapter 16.
Information includes Entering Location, Adjusting Date and
Time, Selecting User interface Language, Selecting Online
Manual Language, Selecting Unites of Measure.
3-6-2-1 User Configurable Key installation
When the system is received, please check the software option
installed on the system, you can refer to the label on the
system’s rear neck for detailed information. The option with
check mark enabled means it is installed.
Figure 3-4. Software Option Label
To Next Page
Loading...
