Introduction
1-16 LOGIQ V3/V5/V5 Expert – Basic Service Manual
5726264-100 English Rev.8
1-6 Safety considerations
1-6-1 Contents in this section
• 1-6-2 ‘Introduction’ on page 1-16
• 1-6-3 ‘Human Safety’ on page 1-16
• 1-6-4 ‘Mechanical safety’ on page 1-19
• 1-6-5 ‘Electrical safety’ on page 1-22
1-6-2 Introduction
The following safety precautions must be observed during all
phases of operation, service and repair of this equipment.
Failure to comply with these precautions or with specific
warnings elsewhere in this manual, violates safety standards of
design, manufacture and intended use of the equipment.
1-6-3 Human Safety
• Operating personnel must not remove the system covers.
• Servicing should be performed by authorized personnel
only.
Only personnel who have participated in a LOGIQ V3/V5/V5
Expert Training Seminar are authorized to service the
equipment.
To Next Page
Loading...
