GE MAC 1200

GE Medical Systems MAC 1200 V 1.2 Page 39
Information Technologies 227 492 21 Rev F
The following table shows the most important combinations:
Device Inter- Output Languages Default settings
model pretation formats
Override Line filter
function
enabled
01 INT *? HEART _| international | international no 50 Hz
02 USA 12SL USA e,f,s yes 60 Hz
03 Europe2*” 12SL | international | international yes 50 Hz
04 Japan *" 12SL |international | e, jap no 50 Hz
05 RUSS*” HEART | international | er no 50 Hz
- Language international: ger, eng, fre, ita, spa, por, swe, nor, fin, dan, dut, czech, hung
- Europe 2: United Kingdom, Benelux, Scandinavia
*1) Not for use in the US
The device model is selected by pressing the appropriate key, “1" to “5".
Quit selection menu by pressing the “X“ key.
Quit the self-test with “X” key.
MAC 1200 configures the appropriate items and initiates a cold start automatically. Thus,
when the device is rebooted automatically all the new settings are adopted.
Note on saved ECGs when configuring the device model:
Saved ECGs are not lost.
If a new device model is selected, the program for Interpretation is switched over; however,
when printing out the saved ECGs the display in the status line (12SL, or without in the case
of HEART) is related to the currently enabled program for Interpretation, although the results
are based on the program previously configured. In this case, the saved ECGs should be
printed out or transferred to a PC before configuration of the new model.