GE MAC 1200

GE Medical Systems MAC 1200 V 1.2 Page 40
Information Technologies 227 492 21 Rev F
3.14 Switching over the program for interpretation
This Point is not accessible when the US Device Model is selected!
Switching over the program for interpretation is activated by pressing the “H” key, the
following display image appears:
Interpretation
1= HEART
2= 12581.
X= End
The currently enabled interpretation program appears in reverse video.
Warning!
Switching over to another program for Interpretation affects the measurement results
and the interpretation!
The program for Interpretation configured during manufacture should only be changed
when deemed really necessary!
The required program for Interpretation is selected by pressing the appropriate key, “1" or
“ou.
Quit the selection menu by pressing the “X” key.
Quit the self-test with the “X” key.
MAC 1200 configures the appropriate items and initiates a cold start automatically. Thus,
when the device is rebooted automatically all the new settings are adopted.
Note on saved ECGs when switching over the program for Interpretation:
Saved ECGs are not lost.
After switching over to a different program for Interpretation when printing the saved ECGs
the display in the status line (12SL, or without in the case of HEART) is related to the newly
selected interpretation program, although the results are based on the program previously
configured. In this case the saved ECGs should be printed out or transferred to a PC before
switching over to the new program for Interpretation.