The Mini Field Agent is rebooted.
Changing User Password
On installing and configuring the Mini Field Agent, the user may
change the password, specific to their facility. This is a
recommended, but optional change.
1. Using PuTTY, in the Host Name field, enter:
• 192.168.101.2
2. Verify that the port number is 22.
3.
Click Open.
4. The Mini Field Agent uses Linux. Log onto the Mini Field Agent
using the Linux root login account.
• Enter the Login: root
• Enter the Password: MrootMfa0210
After typing the password, press Enter.
5. To change the password, enter:
• passwd
6.
Type the new password and press Enter.
There are no specific password requirements or
recommendations. However, if the system does not accept the
entered password, modify as required. It is recommended to
keep the passwords safe.
Note
16 2094532-001 D 02 2018