23. To verify the routing entry, enter:
• route -n
Configuring Incoming Connection to Mini Field Agent
The Mini Field Agent device is required to route the data from the
anesthesia machine to the Cloud Gateway. The Mini Field Agent
uses a TCP server on port 4444 by default to accept any incoming
connections.
The Field Engineer is responsible for configuring the Mini Field Agent
device.
Perform the following procedure to configure the Mini Field Agent
device with the SBX application:
1. Log into WinSCP by using the following details:
• In File protocol drop-down list, select: SCP
Note
2094532-001 D 02 2018 11
To Next Page
Loading...
