GE N60 - 8-Bit Comparators

5-214 N60 Network Stability and Synchrophasor Measurement System GE Multilin
5.7 CONTROL ELEMENTS 5 SETTINGS
5
5.7.13 8-BIT COMPARATORS
PATH: SETTINGS  CONTROL ELEMENTS  8-BIT COMPARATORS  8-BIT COMPARATOR 1(6)
This feature allows simple manipulations on 8-bit numbers. In particular two numbers can be added or subtracted depend-
ing on a user-programmable dynamic condition. User-programmable threshold, hysteresis, direction of comparison, pickup
and dropout time delays can be applied.
 8-BIT
 COMPARATOR 1
8BIT COMP 1
FUNCTION: Disabled
Range: Disabled, Enabled
MESSAGE
8BIT COMP 1 ARG A0:
Off
Range: FlexLogic operand
MESSAGE
8BIT COMP 1 ARG A1:
Off
Range: FlexLogic operand

MESSAGE
8BIT COMP 1 ARG A7:
Off
Range: FlexLogic operand
MESSAGE
8BIT COMP 1 ARG B0:
Off
Range: FlexLogic operand
MESSAGE
8BIT COMP 1 ARG B1:
Off
Range: FlexLogic operand

MESSAGE
8BIT COMP 1 ARG B7:
Off
Range: FlexLogic operand
MESSAGE
8BIT COMP 1 INPUT
MODE: Signed
Range: Signed, Absolute
MESSAGE
8BIT COMP 1
DIRECTION: Over
Range: Over, Under
MESSAGE
8BIT COMP 1 ADD/SUB:
Off
Range: FlexLogic operand
MESSAGE
8BIT COMP 1 PICKUP:
10000.00
Range: –25400.00 to 25400.00 in steps of 0.01
MESSAGE
8BIT COMP 1
HYSTERESIS: 500.00
Range: 0 to 5000.00 in steps of 0.01
MESSAGE
8BIT COMP 1 PICKUP
DELAY: 0.000 s
Range: 0 to 65.353 s in steps of 0.001
MESSAGE
8BIT COMP 1 RESET
DELAY: 0.000 s
Range: 0 to 65.353 s in steps of 0.001
MESSAGE
8BIT COMP 1 SCALE
FACTOR: 1.00
Range: 0.01 to 100.00 in steps of 0.01
MESSAGE
8BIT COMP 1 BLOCK:
Off
Range: FlexLogic operand
MESSAGE
8BIT COMP 1 TARGET:
Self-reset
Range: Self-reset, Latched, Disabled
MESSAGE
8BIT COMP 1 EVENTS:
Disabled
Range: Disabled, Enabled