GE N60 - Direct Analogs; Iec 61580 Goose Analog Values; Phasor Measurement Unit

GE Multilin N60 Network Stability and Synchrophasor Measurement System 6-23
6 ACTUAL VALUES 6.3 METERING
6
6.3.10 DIRECT ANALOGS
PATH: ACTUAL VALUES  METERING  DIRECT ANALOGS
The values for the 32 direct analog inputs are available for display. The values are displayed with the units programmed in
the
DIRECT ANALOG 1 UNITS to DIRECT ANALOG 32 UNITS settings.
6.3.11 IEC 61580 GOOSE ANALOG VALUES
PATH: ACTUAL VALUES  METERING  IEC 61850 GOOSE ANALOGS
The N60 Network Stability and Synchrophasor Measurement System is provided with optional IEC 61850
communications capability. This feature is specified as a software option at the time of ordering. See the
Order Codes section of chapter 2 for details.
The IEC 61850 GGIO3 analog input data points are displayed in this menu. The GGIO3 analog data values are received
via IEC 61850 GOOSE messages sent from other devices.
6.3.12 PHASOR MEASUREMENT UNIT
PATH: ACTUAL VALUES  METERING  PHASOR MEASUREMENT UNIT  PMU 1(6)
 DIRECT ANALOGS

ANALOG INPUT 1:
0.000 unit
MESSAGE
ANALOG INPUT 2:
0.000 unit

MESSAGE
ANALOG INPUT 32:
0.000 unit
 IEC 61850
 GOOSE ANALOGS
ANALOG INPUT 1
0.000
MESSAGE
ANALOG INPUT 2
0.000
MESSAGE
ANALOG INPUT 3
0.000

MESSAGE
ANALOG INPUT 32
0.000
 PMU 1

PMU 1 VA:
0.0000 kV, 0.00°
Range: Va or Vab per VT bank connection
MESSAGE
PMU 1 VB:
0.0000 kV, 0.00°
Range: Va or Vab per VT bank connection
MESSAGE
PMU 1 VC:
0.0000 kV, 0.00°
Range: Va or Vab per VT bank connection
MESSAGE
PMU 1 VX:
0.0000 kV, 0.00°