NX1448E Icon Keypad Page 17
UNBYPASSING
To manually unbypass zones, perform the bypassing procedure on a zone
that is already bypassed. The corresponding icon for that zone will go off
when unbypassed. NOTE: All zones will automatically be unbypassed
each time the system is disarmed.
TURNING THE DOOR CHIME ON AND OFF
The door chime is turned on or off by pressing the [CHIME] key while the
system is in the disarmed state. If the chime is on the chime light will be
illuminated. If the chime is off, the chime light will be off. Each press of
the [CHIME] key will toggle the chime feature on/off and produce a
momentary ding-dong sound.
ADDING AND CHANGING USER CODES
Your system must be Disarmed to change user codes.
Step 1 Press [r]-[5]
Step 2 The Enter Code icon will display. Enter a [“Master
Arm/Disarm” Code].
N For partitioned systems, someone changing the code of
another person must have access to all or more
partitions than the user being changed.
Step 3 The Ready icon will flash.
Step 4 Enter the 2-digit “user number”.
(Always enter 2 digits such as [0]-[3] for user 3.)
Step 5 The instant icon will flash and zone icons will illuminate specifying
the first digit of the “user code”.
To Next Page
Loading...
Need help?
General