GE Security
g
OPERATING INDIVIDUAL AREAS IN THE MULTI-PARTITION MODE
Enter a code that is a valid arm/disarm code for the area you wish to operate. The following display
will appear on the LCD screen.
Only the areas authorized by this code will appear.
To toggle between the armed and disarmed states of an individual area, press [r] [Area number].
To operate an individual area, enter the number of the partition you wish to operate. The LCD keypad
will now operate as a single area keypad. All keys and functions entered will affect this individual
partition only. The lights and display represent the status of that partition only. The word "System"
will be replaced with the word "Area #". The following is an example of this feature. To exit this
screen, press [#].
1 2 - 4 - - 7 8 Disarm
- - 3 - 5 6 - - Arm
Area 5 Ready
Type code to arm
Area 5 is selected and Area 5 is ready to arm. To exit the
individual partition mode, enter [#]-[#].
SILENCING ALARMS IN THE MULTI-PARTITION MODE
If the keypad is sounding an alarm or the siren is running, it can be silenced by entering a code with the
authority for the area(s) that are in alarm. NOTE: The [EXIT], [BYPASS], and [STAY] keys will only work if an
individual partition is selected.
NX-148E User manual Page 22 04/10/04
To Next Page
Loading...
Need help?
General