GE NX-148E - Page 25

GE Security
g
A box containing an expansion device has been opened.
Expander
Box tamper
Expansion
Trouble
Expansion
Siren trouble
Expansion
RF Jammed
Zone
Tamper, Press r
Zone
Low Batt, Press r
Zone
Lost, Press r
Zone
Trouble, Press r
An expansion device or keypad is not reporting to the control panel.
Open circuit has occurred on the bell or siren circuit of the expander.
A radio receiver is being jammed (Not applicable to all controls.)
A zone is tampered. Press [r] to identify the tampered zone.
A wireless device has a low battery. Press [r] to identify the zone.
A wireless or multiplexed zone device is not reporting to the control.
Press [r] to identify the zone.
A zone is experiencing some form of trouble (probably wiring).
Press [r] to identify the zone.
NX-148E User manual Page 25 04/10/04