Contents
18 PAC8000* IO PROFINET Scanner User’s Manual–September 2017 GFK-2839B
1.5.4 Power Supply Requirements
1. The power supply shall have output ratings of 12V DC, 5 A with power fail signal.
2. The power supply shall be current limited and shall meet the output entity parameter
requirements as per our drawing no. SCI-1520 / SCI-1526.
3. It shall comply to class A emission requirements as per CISPR-11.
4. It shall comply to EMC immunity requirements such as surge (2kV) and EFT (2kV).
5. It shall be ATEX marked, CE marked and UL or CSA listed to Class 1 Division 2, Group
A, B, C, D.
6. The power-fail output of the power supply shall be an open-collector output only, capable
of working with maximum 15V pull-up externally connected
For power supply cable and connector for the PAC8000 PNS, refer to part number
8421-CC-PS.
To Next Page
Loading...
