Contents
8 PAC8000* IO PROFINET Scanner User’s Manual–September 2017 GFK-2839B
1.2 PAC8000 PROFINET Scanner Versions
The PNS network interface module is available in two versions to allow you to use the
network media that meet the requirements of your application.
8515-BI-PN: Two 10/100 Mbps copper RJ-45 media connectors supporting shielded
(refer Note below) and unshielded cables (CAT 5 and above)
8516-BI-PN: Two 100Mbps Multimode SC–Duplex fiber optic media connectors
The above PNS modules require the following carrier.
8752-CA-NS: PAC8000 Node Service Carrier
The PNS uses external 12V DC power supply. Optionally user can use two power supplies
having redundancy feature.
Note: The shield connections of RJ45 connectors on 8515-BI-PN module get connected to
the system ground through a capacitor internally, when the module is installed on the carrier.
To Next Page
Loading...
