RTfino/RT3200 Advantage–II/RT–x200 SERVICE MANUALGE MEDICAL SYSTEMS
P9030GX
THEORY
5–10
REV 0
5–3–2 Circuit Board Nomenclature
The following table lists the circuit boards and their respective card cage slot assignments on the mother board of the
RTfino/RT3200 Advantage–II/RT–x200 system. The switching power supply and CRT monitors are not included in
the list. PC boards in card cage slots A0 through A2 constitute the analog signal processing cards. PC boards in slots
A3 through A6 comprise the digital signal processing cards. The MST board in slot A3 is the master control card. It
contains the MST CPU and the USC CPU central processing units.
TABLE 5–2
CIRCUIT BOARD NOMENCLATURE
CARD CAGE SLOT
A0 RFL (Receive Focus and Log)
A1 RRS (Receive and Rearrange Signal)
A2 TRC (Transmit and Receive Control)
A3 MST (Master Controller)
A4 SCC (Scan Converter Controller)
A5 FM (Frame Memory)
A6 VDO (Video Data Output)
PC BOARD
To Next Page
Loading...
