RTfino/RT3200 Advantage–II/RT–x200 SERVICE MANUALGE MEDICAL SYSTEMS
P9030GX
INTRODUCTION
1–9
REV 23
1–2–2 Specifications
Type of protection against electric shock : Class I EQUIPMENT (System) *1
Degree of protection against electric shock : Type BF EQUIPMENT *2
Power source voltage
:US : 115V
~
±10%
:Europe : 220–240V
~
±10%
:Far East : 100V
~
±10%
Line Frequency : 50/60Hz (±2Hz)
*1. Class 1 EQUIPMENT
EQUIPMENT in which protection against electric shock does not rely on BASIC INSULATION only, but which
includes an additional safety precaution in such a way that means are provided for the connection of ACCESSI-
BLE CONDUCTIVE PARTS to the PROTECTIVE(EARTH) CONDUCTOR in the fixed wiring of the installation in
such a way that ACCESSIBLE CONDUCTIVE PARTS cannot become LIVE in the event of a failure of the BASIC
INSULATION.
*2. Type BF EQUIPMENT
Type B EQUIPMENT with a F-TYPE isolated applied part providing a degree of protection against electric shock
to such a degree that the allowable PATIENT LEAKAGE CURRENT under SINGLE FAULT CONDITIONS is not
exceeded when 1.1 times the highest rated MAINS VOLTAGE is applied between the APPLIED PART and earth.
– allowable LEAKAGE CURRENT;
Normal mode Single failure mode
Patient leakage current Less than 100µA Less than 500µA
To Next Page
Loading...
