RTfino/RT3200 Advantage–II/RT–x200 SERVICE MANUALGE MEDICAL SYSTEMS
P9030GX
INSTALLATION AND REPLACEMENT
3–47
REV 21
SECTION (A) Data Recording (continued)
2–11.Record the User Programmable Comments Library.
i. Press the <Control>, O and then the <Enter> key.
ii Press the right arrow key at the bottom of the Function key group three times.
iii The User Programmable Comments Library appears on the screen. If the operator has entered a code
and text , record the screen ( or write down any different items directly onto illustration 3–34).
iv Press the <Control> key.
USER PROGRAMMABLE COMMENTS LIBRARY
CODE TEXT
USER PROGRAMMABLE COMMENTS LIBRARY
ILLUSTRATION 3–34
3. Turn the power switch off and unplug the unit.
To Next Page
Loading...
