RTfino/RT3200 Advantage–II/RT–x200 SERVICE MANUALGE MEDICAL SYSTEMS
P9030GX
DIAGNOSTICS
8–4
REV 5
8–3–4 Sample Command Summary
Table 8–1 provides the command codes, operation performed, pc board tested, and looping/non–looping program
type. (Memory tests loop, while test display and initialization programs run only once).
TABLE 8–1
SS COMMAND CODE SUMMARY
COMMAND OPERATION PC BOARD TESTED LOOPS?
<CONTROL>
S! Enter Service Software Program
SB Generate Borderline
A6 VDO Board No
SD Check Graphic Memory Read/Write A6 VDO Board Yes
<FREEZE>
SL Generate Grid Pattern A6 VDO Board No
–
–
SZ Reset System A3 MST Board No
To Next Page
Loading...
