GE RTfino/RT3200 - Chapter 4: Functional Checks; Introduction and Required Equipment for Checks

RTfino/RT3200 Advantage–II/RT–x200 SERVICE MANUALGE MEDICAL SYSTEMS
P9030GX
FUNCTIONAL CHECKS
4–3
REV 0
4–1 INTRODUCTION
This chapter provides procedures for quickly checking of the RTfino/RT3200 Advantage–II/RT–x200. The other
service chapters are Chapter 6, Service Adjustments.
Note
• These procedures form part of the Installation Checklist found in Chapter 3, Installation, and
should be performed during installation.
• However, these procedures are also the basic checks to use when service is required. In this
case, use this section’s table of contents to locate and exercise the specific function related to the
service complaint.
4–1–1 Required Equipment
To perform these tests, you’ll need the following items:
• 3.5 MHz B Type Linear Transducer or a 3.5 MHz CB type convex transducer.