Need help?Do you have a question about the GE RTfino/RT3200 and is the answer not in the manual?
General| Focal Spot Size | 0.6/1.2 mm |
|---|---|
| Frequency Range | 50/60 Hz |
| Power Supply | 100-240 VAC, 50/60 Hz |
| X-Ray Tube | Rotating Anode |
| Detector Type | Digital Flat Panel |
| Detector Size | 17" x 17" |
| Pixel Pitch | 139 μm |
Covers essential safety guidelines, warnings, and electrical specifications for safe operation.
Information on EMC performance, installation notices, and countermeasures for interference.
Provides addresses and contact details for service support centers.
Describes the unit's purpose, ultrasound imaging process, and console functions.
Details electrical requirements, leakage current, power lines, and physical attributes.
Environmental conditions for operation, shipping, and storage, including floor loading.
Information on connector panels, probes, recording devices, and connecting cables.
Critical warnings for installation and detailed steps for unpacking system components.
Procedures for assembling the system, connecting transducers, foot switch, and power.
Instructions and precautions for moving the system to another room or transporting it.
Comprehensive tests for outlet wiring, grounding continuity, chassis, probe, and ECG leakage.
Steps to diagnose and resolve issues related to excessive leakage current.
Detailed instructions for replacing the gas spring, keyboard, and monitor.
Procedures for installing French and German ROMs, including data recording and initialization.
Overview of functional checks and the necessary equipment for performing them.
Detailed steps for power-up checks, LED indicators, and CRT display verification.
Instructions to refer to the Operator Manual for additional functional checks.
Explanation of ultrasound production, reflection, and display methods like B-Mode and M-Mode.
Details on beam focusing techniques and echo signal processing including TGC/TFC.
Overview of system architecture, signal flow, and identification of circuit boards.
Procedure for adjusting power supply voltages to specified levels.
Detailed wiring schematics for the operator console assembly.
Introduction to SS and SDP programs, and how to enter the Service Software program.
Methods to stop routines and a summary of SS command codes for diagnostics.
Comprehensive material lists for different Operator CSL Assembly models.
Material lists for Fan Assembly and Fan Cable Assembly.
Material lists for Pipe Assembly and Transformer Assembly.
Material lists for Keyboard, Shelf Sets, and Adaptor Support Sets.
Material lists for Front Panel and Upper Panel assemblies.
Material lists for various Cable Assemblies (1-43).
Overview of preventative maintenance and reference to related chapters.
Procedures including functional checks, cable inspection, fan checks, and voltage checks.
Detailed steps for cleaning the monitor and installing the CRT filter securely.
Performing hospital outlet, transducer, and console safety tests as part of maintenance.
To Next Page