GE Senographe DS Operator's Manual

Chapter 13 Page no. 140 13-print.fm
GE Healthcare Senographe DS Acquisition System
Revision 1 Operator Manual 5307907-3-S-1EN
Printing
3-2 Manual Print
In addition to the Auto Print function, an image displayed on the Viewer screen can be printed at any
time under manual control.
Click the Print button in the Viewer Function panel to open the Print Request window.
Facilities available from the Print Request window are:
• DICOM printers: contains the list of all the available DICOM printers that have been declared for
printing. Click on a printer in the list to select it.
• Review Rooms: contains the list of all environmental conditions of available review rooms. Select
the room corresponding to the printer. Refer to your field engineer or printer manufacturer for
review room configuration.
• Print mode: can not be changed. Fit to Film only.
• Number of Copies box: enter the required number of copies in this box.
• Printing properties ... button: click this button to open the Printing Properties window
(see section 3-3 Printer properties on page 141).
• Print button: click this button to print the displayed image on the currently selected printer.
• Queue button: click this button to open the Filming Queue window (see section 3-5 Filming queue
on page 142).
• Save button: click this button to confirm any changes made and close the window.
• Cancel button: click this button to cancel any changes made and close the window.
Print Queue Save Cancel
Print mode
Print Request
DICOM printers
Fit to Film
Number Of Copies (1.. 9)
PRINTER 1
PRINTER 2
PRINTER 3
Review Rooms
Printing properties ...
FOR TRAINING PURPOSES ONLY!
NOTE: Once downloaded, this document is UNCONTROLLED, and therefore may not be the latest revision. Always confirm revision status against a validated source (ie CDL).

GE Senographe DS Specifications

General

Brand	GE
Model	Senographe DS
Category	Medical Equipment
Language	English