GE Senographe DS Operator's Manual

GE Healthcare Senographe DS Acquisition System
Revision 1 Operator Manual 5307907-3-S-1EN
Browser
8-browser.fm Page no. 79 Chapter 8
Test Hosts
Use this screen to test remote host connections. Select the host(s) to be tested in the three windows
(Remote Workstations, Remote Printers, and Remote HIS/RIS servers), and click the Test selected
hosts ... button to start the test. A message is displayed to indicate whether the test was successful or
the host could not be reached.
Names
Use this screen to enter and store the names of Operators, Performing physicians, and Referring physi-
cians. The stored names may then be recalled from the database when required, avoiding the need for
retyping each time a Medical Procedure Card is created or updated.
Save
Close
Select remote hosts you want to test
Remote Workstations Remote Printers Remote HIS/RIS servers
Test selected hosts ...
Auto Push Auto Print Annotations Auto Windowing Quality Check Auto Delete Test Hosts Names Image Process.
MedAppPrefs
Referring Physician 1
Referring Physician 2
Performing Physician 1Operator 1
Operator 2
CloseSave
Operators
Performing physicians Referring physicians
add
modify
delete
Define or modify names in database
Auto Push Auto Print Annotations Auto Windowing Quality Check Auto Delete Test Hosts Names Image Process.
MedAppPrefs
FOR TRAINING PURPOSES ONLY!
NOTE: Once downloaded, this document is UNCONTROLLED, and therefore may not be the latest revision. Always confirm revision status against a validated source (ie CDL).

GE Senographe DS Specifications

General

Brand	GE
Model	Senographe DS
Category	Medical Equipment
Language	English