GE SG Series User Manual

Critical Power
Installation Guide
Uninterruptible Power Supply
GE Consumer & Industrial SA
General Electric Company
CH – 6595 Riazzino (Locarno)
Switzerland
T +41 (0)91 / 850 51 51
F +41 (0)91 / 850 52 52
www.gecriticalpower.com
g
imagination at work
SGT5000_030-040_UPS_GE_01a

GE SG Series Specifications

General

Topology	Line Interactive
Frequency	50/60 Hz
Battery Type	Sealed Lead-Acid (SLA)
Typical Recharge Time	4-6 hours
Operating Temperature	0°C to 40°C
Input Voltage	120V
Output Voltage	120V

Summary

SAFETY RULES

General Safety Precautions

General safety guidelines for handling and operating the UPS system.

Installation Safety Guidelines

Safety instructions specific to the installation and wiring of the UPS.

Battery Safety Precautions

Critical safety instructions for handling and connecting UPS batteries.

INSTALLATION

UPS Transport and Handling

UPS Location Requirements

Criteria for choosing the installation site and positioning the UPS unit.

Ventilation and Cooling

Unpacking Procedures

Utility Input Connection

Input/Output Protection & Wiring

Guidance on overcurrent protection and wire sizing for UPS inputs and outputs.

Battery Wiring & Protection

Instructions for connecting and protecting the UPS battery system, including cable sizing.

Power Connection Procedures

Detailed steps for making all power connections (input, output, battery).

Common Input Utility Connections

Dual Input Utility Connections

Battery Connection

Procedures for connecting internal and external batteries to the UPS.

RPA Parallel System Installation

RPA Parallel Control Bus Connection

CUSTOMER INTERFACE

Emergency Power Off (EPO) Connection